Difference between revisions of "MainPage:Nuclear:EquipmentOp"
Jump to navigation
Jump to search
| Line 17: | Line 17: | ||
To set HV on channel 0: | To set HV on channel 0: | ||
Type 1 (to change "ADDRESS") | Type 1 (to change "ADDRESS") | ||
| + | Type 0x0080 (Address of VSET for channel 0) | ||
Type 10xV (10 times the voltage you want, e.g. if you want 1000V, type 10000 - resolution of 0.1V) | Type 10xV (10 times the voltage you want, e.g. if you want 1000V, type 10000 - resolution of 0.1V) | ||
Type "R" or "W" (if you want to Read the voltage or Write the voltage) | Type "R" or "W" (if you want to Read the voltage or Write the voltage) | ||
Revision as of 11:09, 11 September 2013
| ⇐ Back to the Main_Page |
CAEN VME HV Module
Running "sample" code
This code allows one to "easily" control the parameters of any board using the V1718 control module.
To access the module:
./CAENVMEDemo V1718 1
To set up V6533N Address Base (according to its switches SW8, 9, 10, 11 located in the very back of the modulus):
Type 2 (to change "BASE ADDRESS") Type 32100000 (considering SW8=3 SW9=2 SW10=1 SW11=0, as it came originally)
To set HV on channel 0:
Type 1 (to change "ADDRESS") Type 0x0080 (Address of VSET for channel 0) Type 10xV (10 times the voltage you want, e.g. if you want 1000V, type 10000 - resolution of 0.1V) Type "R" or "W" (if you want to Read the voltage or Write the voltage)