Difference between revisions of "MainPage:Nuclear:KaonDetector:AerogelDetectorConstruction"
| Line 114: | Line 114: | ||
| 67165-00019 sh. 8 | | 67165-00019 sh. 8 | ||
|} | |} | ||
| − | (Legend: [[File:Check.png|15px]] is ready, [[File:RightArrowGreen.jpg|15px]] is being milled at the moment, [[File:Drop.gif|15px]] | + | (Legend: [[File:Check.png|15px]] is ready, [[File:RightArrowGreen.jpg|15px]] is being milled at the moment, [[File:Drop.gif|15px]] was cutted (water cutting) for future milling and [[File:Empty.png|15px]] is not milled) |
It is going to be constructed three trays (aerogel boxes). The following list includes the milling parts required for all of these trays. | It is going to be constructed three trays (aerogel boxes). The following list includes the milling parts required for all of these trays. | ||
Revision as of 21:35, 10 November 2011
| This page is under construction. It requires a review! |
| ⇐ Back to the Kaon Detector page |
Drawings
Links to drawings files.
Materials and pieces machining
The materials had been ordered by Dr. Marek. Almost all the structural pieces (aluminum pieces) was delivered on October 10th, at CUA. Paul and Michael started milling the first piece of our new detector on October 13!
This construction is being conducting under a collaboration between the Nuclear Physics Group and the Vitreous State Laboratory group (VSL).
Checklist of the progress on the milling
The following checklists are an overview of the main parts of the detector and the progress on its construction. As it is going to be constructed one diffusion box and three aerogel trays, these list provide the status on the progress for each piece of all of the items.
Last update: October 26, 2011
| Qty. | Status | Part | Drawing |
|---|---|---|---|
| 1 | 
|
Cover plate | 67165-00012 sh. 1 |
| 1 | 
|
Attachment plate | 67165-00016 sh. 1 |
| 1 |
|
Interface plate | 67165-00018 sh. 1 |
| 6 |
|
Tube port cover | 67165-00019 sh. 4 |
| 22 |
|
PMT outer shield | 67165-00019 sh. 4 |
| 22 | 
|
PMT outer shield end plate | 67165-00019 sh. 4 |
| 22 |
|
PMT inner shield | 67165-00019 sh. 5 |
| 2 |
|
Diffusion box vertical | 67165-00019 sh. 5 |
| 1 |
|
Diffusion box top | 67165-00019 sh. 6 |
| 1 | 
|
Diffusion box lower | 67165-00019 sh. 7 |
| 2 |
|
Diffusion box vertical bar | 67165-00019 sh. 8 |
| 2 |
|
Diffusion box horizontal bar | 67165-00019 sh. 8 |
| 22 |
|
PMT spacer | 67165-00019 sh. 8 |
| 1 |
|
Diffusion box upper plate | 67165-00019 sh. 8 |
(Legend: is ready, is being milled at the moment, was cutted (water cutting) for future milling and is not milled)
It is going to be constructed three trays (aerogel boxes). The following list includes the milling parts required for all of these trays.
| Qty. | Status | Part | Drawing |
|---|---|---|---|
| 3x2 |
|
Aerogel box vertical | 67165-00020 sh. 3 |
| 3x2 |
|
Aerogel box horizontal | 67165-00020 sh. 4 |
| 3x2 |
|
Aerogel box vertical angle | 67165-00020 sh. 5 |
| 3x2 |
|
Aerogel box horizontal angle | 67165-00020 sh. 5 |
| 3x1 |
|
Aerogel box bottom plate | 67165-00020 sh. 5 |
(Legend: is ready, is being milled at the moment and is not milled)