MainPage:Nuclear:KaonDetector:AerogelDetectorConstruction

This page is under construction. It requires a review!

⇐ Back to the Kaon Detector page

Checklist of the progress on the milling

The following checklists are an overview of the main parts of the detector and the progress on its construction. As it is going to be constructed one diffusion box and three aerogel trays, these list provide the status on the progress for each piece of all of the items.

Last update: November 10, 2011

Diffusion box

Qty.	Status	Part	Drawing
1		Cover plate	67165-00012 sh. 1
1		Attachment plate	67165-00016 sh. 1
1		Interface plate	67165-00018 sh. 1
6		Tube port cover	67165-00019 sh. 4
22		PMT outer shield	67165-00019 sh. 4
22		PMT outer shield end plate	67165-00019 sh. 4
22		PMT inner shield	67165-00019 sh. 5
2		Diffusion box vertical	67165-00019 sh. 5
1		Diffusion box top	67165-00019 sh. 6
1		Diffusion box lower	67165-00019 sh. 7
2		Diffusion box vertical bar	67165-00019 sh. 8
2		Diffusion box horizontal bar	67165-00019 sh. 8
22		PMT spacer	67165-00019 sh. 8
1		Diffusion box upper plate	67165-00019 sh. 8

(Legend: is ready, is being milled at the moment, was cutted (water cutting) for future milling and is not milled)

It is going to be constructed three trays (aerogel boxes). The following list includes the milling parts required for all of these trays.

Aerogel trays

Qty.	Status	Part	Drawing
3x2		Aerogel box vertical	67165-00020 sh. 3
3x2		Aerogel box horizontal	67165-00020 sh. 4
3x2		Aerogel box vertical angle	67165-00020 sh. 5
3x2		Aerogel box horizontal angle	67165-00020 sh. 5
3x1		Aerogel box bottom plate	67165-00020 sh. 5

(Legend: is ready, is being milled at the moment and is not milled)

Materials and pieces machining

The materials had been ordered by Dr. Marek. Almost all the structural pieces (aluminum pieces) was delivered on October 10th, at CUA. Paul and Michael started milling the first piece of our new detector on October 13!

The materials for the construction of the detector.

This construction is being conducting under a collaboration between the Nuclear Physics Group and the Vitreous State Laboratory group (VSL).

Ready pieces

As the machining process is going on, the first pieces of the Kaon Aerogel Detector are being ready! Paul and Michel are working at the CUA Machine Shop and the progress of the construction can be verified in the following pictures.

Pieces of the detector that are ready.

6x Tube Port Cover, to close the top ports when the optional PMTs are not being using.

2x Diffusion Box Vertical Bar, that will allow to hold the aerogel trays with the diffusion box

Interface plate and Attachment plate on the milling cutter. They are going to hold all the detector on a trail at the SHMS.

Some of the materials require the cut of large pieces, for instance, the side plates of the diffusion box and also the PMT's end plates. These cuttings are related to the pieces that will hold the PMTs in the detector. As the PMTs have an overall diameter of 5", holes with this dimensions were required in that material.

As a first step on the machining of these pieces, they were send to a company for a water cutting.

Material cutted.

6x Tube Port Cover, to close the top ports when the optional PMTs are not being using.

2x Diffusion Box Vertical Bar, that will allow to hold the aerogel trays with the diffusion box