MainPage:Nuclear:KaonDetector:AerogelDetectorConstruction
Revision as of 09:12, 21 October 2011 by Marcoapc (talk | contribs) (→Checklist of the milling parts)
| This page is under construction. It requires a review! |
| ⇐ Back to the Kaon Detector page |
Drawings
Links to drawings files.
Material orders
The materials had been ordered by Dr. Marek. Almost all the structural pieces (aluminum pieces) was delivered on October 10th, at CUA. Paul started milling the first piece of our new detector on October 13!
Checklist of the milling parts
The following checklist is an overview of the milling parts of the detector and the progress on its construction. As it is going to be constructed one diffusion box and three aerogel trays, this list provides space for checking the progress of each piece of all of these items.
| Qty. | Status | Piece | Drawing |
|---|---|---|---|
| 1 | 
|
Cover plate | 67165-00012 sh. 1 |
| 1 | 
|
Interface plate | 67165-00018 sh. 1 |
| 6 |
|
Tube port cover | 67165-00019 sh. 4 |
| 22 |
|
PMT outer shield | 67165-00019 sh. 4 |
| 22 |
|
PMT outer shield end plate | 67165-00019 sh. 4 |
| 22 |
|
PMT inner shield | 67165-00019 sh. 5 |
| 2 |
|
Diffusion box vertical | 67165-00019 sh. 5 |
| 1 |
|
Diffusion box top | 67165-00019 sh. 6 |
| 1 |
|
Diffusion box lower | 67165-00019 sh. 7 |
| 2 |
|
Diffusion box vertical bar | 67165-00019 sh. 8 |
| 2 |
|
Diffusion box horizontal bar | 67165-00019 sh. 8 |
| 22 |
|
PMT spacer | 67165-00019 sh. 8 |
| 1 |
|
Diffusion box upper plate | 67165-00019 sh. 8 |
(Legend: 
is ready, is being milled at the moment and is not milled)
It is going to be constructed three trays (aerogel boxes). The following list includes the milling parts required for all of these trays.
| Status | Piece | Drawing |
|---|---|---|
| Nx
|
Special wire screw | 67165-00015 sh. 1 |
|
|
b | c |